Rod and Piston Kit for Gen 3
IE Tuscan I-Beam Rods w/ Mahle 83mm Piston Set Kit – Gen 3
VAG Cafe has assembled a complete Piston and Rod kit for the Gen 3 application. This kit fits all 2.0T MQB applications (Please enter vehicle to confirm fitment).
Included in this kit:
- Integrated Engineering Tuscan I-Beam Connecting Rods- 2.0T Generation 3
- Mahle 2.0T Gen 3 Piston Set- 83mm
Integrated Engineering Tuscan I-Beam Connecting Rods- 2.0T Generation 3
One of the hallmarks of a high quality connecting rod is its strength to weight ratio. Anyone can create an extremely strong rod out of a huge chunk of steel. Creating one with a reasonable weight that works well in today’s high rpm European applications, and holds up to a lifetime of torture is another story. In order to create this balance of strength and light weight, an H beam design is utilized. The design is validated and optimized using modern CAD drafting and FEA analysis techniques. These techniques ensure the rod is as light and strong as possible.
The material specification and treatment is equally important to producing a quality connecting rod with a high strength to weigh ratio. Our steel rods feature 4340 Chrome Moly steel, formed into shape using a 2 piece forging for the highest possible fatigue life. The material is multi-stage heat treated to ensure the highest possible fatigue strength as well as good dimensional stability. This feature ensures that our big ends stay round for a lifetime of bearing trouble free service. Following this pattern of high quality, ARP 2000 rod bolts are standard in all of our applications, while they are an upgrade at additional cost in many of our competitors.
Features
- 2 Piece Forgings from Vacuum Drawn 4340 Chrome Moly Steel
- Multi Stage Heat Treat for maximum strength, dimensional stability, and fatigue life.
- Fully Machined and Shot Peened
- Tolerances as tight as .0003 ground on Sunnen brand equipment
- Standard ARP2000 Rod Bolts
- Computer Optimized Design
- Magnaflux Inspected
- Dimensionally Inspected
- Packed in balanced sets +/- 1 gram.
- All this at a price point that yields market leading value
Mahle 2.0T Gen 3 Piston Set- 83mm
Mahle proud to offer these pistons for the VW & Audi MK7/MQB 2.0T Gen 3 TSI engines, offering industry-leading features, OEM fitment, and OEM-like wear characteristics. These pistons are recommended for any high performance engine build, as they offer unparalleled strength and longevity.
The only way to make an aftermarket performance piston operate like an OEM piston is to design it like one. These pistons are designed with a proprietary factory-style dish on the crown, which is absolutely necessary for smooth operation with the direct injection system. If this shape of dish is not used, combustion is poor and engines do not run smoothly. We offer these pistons in 9.3:1, which is very close to the factory MK7/MQB 2.0T compression ratio. We have tested these engines with several other compression ratios, both lower and higher. We have found that they are very susceptible to knocking, due to the complexity and precision of the direct injection system.
To maximize power output, the clearances between the rings and piston have been brought in very tightly to reduce blow by. This is achieved by hard anodizing the top ring lands, which prevents micro welding which could be caused otherwise.
To maintain OEM-like wear characteristics, these pistons are coated with Mahle’s Grafal skirt coating. This coating reduces friction on the skirts, keeping them quiet and from wearing over time- extending piston life. The grey appearance of these pistons is due to a phosphate coating. Providing a lubricant film in the pin bores and ring grooves, this coating is essential for initial startup and break-in of the engine to prevent micro welding and galling. Features like these are what allow these pistons to last for thousands of miles, just like OEM units.
In order to call these pistons the ultimate replacements for OEM, they need to fit like them. They are made with the same oil squirter notches found on factory pistons. These do not require any squirter clearancing or modification for fitment.
These pistons are manufactured from Mahle’s proprietary 142P alloy. This unique alloy offers the low-expansion characteristics of 4032 but strength near that of 2618 alloy. The low-expansion quality allows piston-to-wall clearances to be set tight, which allow the pistons to operate like OEM, quietly and smoothly.
Included is a set of performance piston rings, featuring a barrel-faced top ring, ductile iron, and 3 piece oil ring. These rings are designed to eliminate unnecessary drag, which reduces friction and increases power. Each set also includes high quality German steel wrist pins and wire locks, which are 22mm in diameter. From testing different piston sizes on these engines, we have determined that the 22mm pin is ideal for strength and durability.
Beneath the top ring and second ring lands an accumulator groove is machined, which provides a cavity where blow-by gasses can collect. This reduces pressure between rings, while virtually eliminating ring flutter and keeps top rings sealed securely against the bores.
The available in 83mm increases displacement to 2008cc and allows you to bore and hone the block to the exact specifications required to ensure best results.
Special order item
